English


uiWebPrevious123uiWebNext

#16 Report | Quote[en] 

Placio, I disagree.

In the first place, a scroll increases your effective *level* by a certain amount, not your percentage chance. Thus if you are overcrafting to 250 from 190 and you use a q50 scroll, your chance of success will still be 5% (effective level 200), not 15%. The display in the crafting window is in error. The information given by a right click on the object is correct. This has been determined by careful study by myself and by Daomei.

The question would then be: is the use of a scroll to increase your chance of success in cases where you are overcrafting by less than 50 points worth it? I doubt it because you only get the maximum of 300 xp/mat at the level of 50 levels of overcraft or greater.

In addition, scrolls have significant cooldown when you could be crafting, but aren't if you are waiting for the next scroll.

Where scrolls make a tremendous difference is in the amount of material used to make q250 boosted sets.

---


Remembering Tyneetryk
Phaedreas Tears - 15 years old and first(*) of true neutral guilds in Atys.
(*) This statement is contested, but we are certainly the longest lasting.
<clowns | me & you | jokers>

#17 Report | Quote[en] 

There's no cooldown on scrolls, only reuse timer, which is shorter than the effects of the scroll last.

The situation was overcrafting by 50 lvls, not the 60 in your situation, so a q50 scroll would make it like you were only overcrafting by 42 levels instead of 50, but still getting xp for the 50.

Last edited by Placio (9 years ago)

#18 Report | Quote[en] 

You clearly have not used q60 and q70 scrolls. The reuse time on those is significantly longer than the use time.

Were you still getting the xp for a 50 level difference in your case of a 50 level difference and a q40 scroll? If so, that's a bug. :D

---


Remembering Tyneetryk
Phaedreas Tears - 15 years old and first(*) of true neutral guilds in Atys.
(*) This statement is contested, but we are certainly the longest lasting.
<clowns | me & you | jokers>

#19 Report | Quote[en] 

why on Atys would it be a bug? And i dont understand your claim that success is less than what is dispalyed, I just checked and success rate goes up by about 1.6% at those low levels, so if using a q50 and it adds 8 levels than it actually should increase the success by 13% :(

Edited 2 times | Last edited by Placio (9 years ago)

#20 Report | Quote[en] 

It would be a bug because XP is supposed to be based on the level of the the person vs. the level of the operation. It should not matter if the level is a base level or an enhanced level.

(A q50 scroll adds 10 levels.)

Last edited by Bitttymacod (9 years ago)

---


Remembering Tyneetryk
Phaedreas Tears - 15 years old and first(*) of true neutral guilds in Atys.
(*) This statement is contested, but we are certainly the longest lasting.
<clowns | me & you | jokers>

#21 Report | Quote[en] 

Yes i has a q40 in my bag :( but an increase of 10 levels still produces an additional 16%. XP is your lvl vs final product, I checked that also, it did not change even with a scroll boost. So I still stand by my advice to use scrolls when overcrafting by the already established 50 lvls. And I still dont know why you think the scrolls give levels- that would result in more success rate than the 8% or 10% etc. that the product states.

#22 Report | Quote[en] 

I state that scrolls give levels because of analysis of the use of scrolls at high level. The success rates are within experimental error of the result for boosting levels and well away from the percent increase reported by the crafting window.

And I maintain that using them to grind overcrafting is a waste of resources that could be used to decrease your chance of a degrade when making something useful. It just is not that difficult to harvest more grind mats than you can shake a stick at. Minor improvements in xp gain per hour are just that, minor.

This, however is philosophical. Use of scrolls certainly will not strongly affect how rapidly you advance from journeyman (level 200) to master, but if you want to do it, feel free.

---


Remembering Tyneetryk
Phaedreas Tears - 15 years old and first(*) of true neutral guilds in Atys.
(*) This statement is contested, but we are certainly the longest lasting.
<clowns | me & you | jokers>

#23 Report | Quote[en] 

I'm not sure what analysis you did, but the craft actions are independent. In essence if your success rate is 5% than you have a 95% degrade chance on every item, even if you make a million, and because the actions are independent you will have much lower than 5% on average.

I'm not sure you analysis of high levels should be applied to overcrafting; if overcrafting you gain 1.6% for every skill level you get closer to your action level- under your levels hypothesis this would give 1.6x the amount of points stated by the scrolls and craft window. However if the crafter's level is above their action level they only get 0.5% for every level above- this might explain you lower observations, or it was just random.

Finally, scrolls are not some rare thing. they are pretty easy to replace. and the 'minor' xp improvements can add up, because a boost of 8 or 10% might not get you your full action q but will increase the q of the majority of degrades.

#24 Report | Quote[en] 

Placio (atys)
I'm not sure what analysis you did, but the craft actions are independent. In essence if your success rate is 5% than you have a 95% degrade chance on every item, even if you make a million, and because the actions are independent you will have much lower than 5% on average.

I'm not sure you analysis of high levels should be applied to overcrafting; if overcrafting you gain 1.6% for every skill level you get closer to your action level- under your levels hypothesis this would give 1.6x the amount of points stated by the scrolls and craft window. However if the crafter's level is above their action level they only get 0.5% for every level above- this might explain you lower observations, or it was just random.

Finally, scrolls are not some rare thing. they are pretty easy to replace. and the 'minor' xp improvements can add up, because a boost of 8 or 10% might not get you your full action q but will increase the q of the majority of degrades.

The analysis on my part involved several thousand crafts using q60 scrolls, the highest level that is "easy" to get. Daomei's analysis involved a similar number of crafting actions using q70 scrolls, because she is even more bloody-minded than I am. The percentages matched the 0.5% per level figure that you note.

Your analysis of the statistics, however, is flawed. The actions are indeed independent, but a 5% success chance means that *on the average* one crafting action in 20 will be a complete success. This will be true whether you craft a thousand times or ten thousand times. There is no reduction in percentages for large numbers of actions; on the contrary there is a closer and closer approach to the 5% value as random variations even themselves out.

In addition there is no indication that the potential frequency of a certain amount of degrade if there is not success is affected by the level of crafting skill. As a master I have only a 15% chance of degrade when crafting at q250. However, I seem to have just as much chance of producing a q200 as I have of producing a q245 if I do fail, and this does not change even when I am using scrolls.

Without looking at the code I cannot be certain, but it very much looks as if the calculation is :

xx=rand(1,100)
if xx<=success_threshold
then q_result = q_attempt ; (success!)
else
yy = rand(1,100) * 0.20
q_result = q_attempt * (1 - yy) ; (degrade by random amount up to 20%)
endif

Whether or not there are extra decimals involved in the calculation is a detail.

The real question in my mind is whether or not the increase in success factor will produce a decrease in time to master that is significant in terms of requiring significantly fewer bags of materials or hours on line. Obviously it will have some effect, but I doubt very much that it is a large one.

---


Remembering Tyneetryk
Phaedreas Tears - 15 years old and first(*) of true neutral guilds in Atys.
(*) This statement is contested, but we are certainly the longest lasting.
<clowns | me & you | jokers>

#25 Report | Quote[en] 

No Bittty, independent means action 1 is 5% chance, action 2 is 5% chance, etc. Even if you get 999,999 fails in a row the next action still only has a 5% chance of success. So if your success is lower than 50% you will tend to fail more than each action failure rate, and if the rate is above 50% you will tend to succeed more than the rate would suggest.

I finally found Dao's post, and she concluded that scrolls are working properly now. You levels hypothesis is accepted by a few the know the game code better than me, so I'll go with it. But that would make scrolls even more valuable to over crafters because it is 1.6 percent additional success for each skill level approaching the action level.

#26 Report | Quote[en] 

Placio (atys)
No Bittty, independent means action 1 is 5% chance, action 2 is 5% chance, etc. Even if you get 999,999 fails in a row the next action still only has a 5% chance of success.
True, as far as it goes. However, it assumes that we know the ideal chance of success. (e.g. we know that it is a totally unbiased d20 that we are watching for a 3 to appear). While your example is correct if we know that, the probability of that occurrence is very very low.

If we were attempting to evaluate what the true chance of success was by measuring data and we had that result, our best estimate would be that the chance of success was one in a million.

Placio (atys)
So if your success is lower than 50% you will tend to fail more than each action failure rate, and if the rate is above 50% you will tend to succeed more than the rate would suggest.
False, because if it were true it would mean that the measurements were not independent.

What you are saying is equivalent to saying that since I get an 85% chance (as reported) to successfully make a single jewel, that my overall rate of creating jewels should be *more* than 85%.
Placio (atys)
I finally found Dao's post, and she concluded that scrolls are working properly now. You levels hypothesis is accepted by a few the know the game code better than me, so I'll go with it. But that would make scrolls even more valuable to over crafters because it is 1.6 percent additional success for each skill level approaching the action level.

In fact, hers was a very conservative statement. There is no solid evidence to suggest that the scrolls were actually ever broken.

Once again, you assert "value". I once again assert that if the "value" is decreased time and mats to master rank, that the value is there, but that it is small.

---


Remembering Tyneetryk
Phaedreas Tears - 15 years old and first(*) of true neutral guilds in Atys.
(*) This statement is contested, but we are certainly the longest lasting.
<clowns | me & you | jokers>

#27 Report | Quote[en] 

Bitttymacod (atys)
If we were attempting to evaluate what the true chance of success was by measuring data and we had that result, our best estimate would be that the chance of success was one in a million.

In my example you might have observed 1 in a million, but the chance of each action is still 5%. As they are independent they do not have to average out so that our sample has a success rate similar to each individual action. If you did another million crafts the rate would almost certainly be different each time. No matter how many times you observe the only thing that matters is the individual craft's success rate; Its like playing Roulette and saying my number *must* come up once every 37 spins, well it could come up 3 times in 37 spins or not once in 10,000 spins...

Bitttymacod (atys)
Placio (atys)
So if your success is lower than 50% you will tend to fail more than each action failure rate, and if the rate is above 50% you will tend to succeed more than the rate would suggest.
False, because if it were true it would mean that the measurements were not independent.

What you are saying is equivalent to saying that since I get an 85% chance (as reported) to successfully make a single jewel, that my overall rate of creating jewels should be *more* than 85%.

I said *tend* in your example you have an 85% success rate, so every time you craft there is a better chance that you will succeed than fail (15% failure rate per action). In the case of an over crafter where success is only 10% this time, there is a better chance of failure each action. If you failure rate is 90% each time it would *tend* to give you less than 10% success because each time you have a great risk of failing. But as you point out they are independent, so they do not have to trend that way, you might get lucky one day or really unlucky the next.

Bitttymacod (atys)
Once again, you assert "value". I once again assert that if the "value" is decreased time and mats to master rank, that the value is there, but that it is small.

Based on your levels hypothesis I argued that scrolls provide more benefit to over crafters, because when a master uses them they only get .5% for each level over their skill, but over crafters get 1.6% for each level that they get closer to the action level. So a master getting 10 point boost from a scroll only gets an additional 5%, but an over crafter getting the same 10 point boost will get an additional 16% success.

#28 Report | Quote[en] 

It's true that individual actions are very random, but I think Bitty is right about the larger data having average closer to the chance.

 

You can try this out in a spreadsheet. Add a small amount of random numbers between 0-1. The average is probably not very close to 0.5 (the middle point). Now start adding more random numbers and you will see the average getting closer to 0.5 more often.

 

So I think you can calculate the chance if you have enough data. What is enough data? Depends on the chance, if the chance is smaller you need more data.

.

---

I don't want to be the one
The battles always choose
'Cause inside I realize
That I'm the one confused

#29 Report | Quote[en] 

Rubiksmomo (atys)
It's true that individual actions are very random, but I think Bitty is right about the larger data having average closer to the chance.

You can try this out in a spreadsheet. Add a small amount of random numbers between 0-1. The average is probably not very close to 0.5 (the middle point). Now start adding more random numbers and you will see the average getting closer to 0.5 more often.

[p]So I think you can calculate the chance if you have enough data. What is enough data? Depends on the chance, if the chance is smaller you need more data.
[/p]

How much data you need also depends on how the Random Number Generator works. For instance, taking one regular six-sided die, the RNG most people are familar with, will give you numbers between 1 and 6 with a pretty even distribution that gets closer to 16.66...% as you add more data points.

However, taking two six-sided dice to get random numbers between 2 and 12 will yield a V-shaped curve with the odds of getting a sum of 7 being equal to the combined odd of getting 2,3,11 and 12 combined; of the thirty-six possibilities, six yield a 7 while 2 and 12 only have one possibility each while 3 and 11 each have two, and (1+2+2+1)=6.

So how many data points are needed kind of depends on how many "dice" are used. One gives a linear distribution with equal chances of each result, two results in a V-curve, using three or more is a bell curve. In the event of a curve (V or bell), the center will be halfway between the high end low limits of the range.

Usually rolling a number of times equal to twice the number of possible outcomes will tell you whether it's a single "die" or multiple "dice", but to get a reasonably accurate curve you need a number of samples at least three times the total number of possibilities, an number which increases exponentially as teh number of "dice" increases. For 2d6 with thirty-six possible outcomes, about a hundred data points will be pretty accurate since (3*36)=108, but 3d6 has two-hundred-and-sixteen possible outcomes, meaning over six hundred data points would be required for reasonable accuracy.

The real question then is who (if anyone) has the free time and desire to do the research to make a spreadsheet. I may be a numbers geek, but even I have limits to how much statistics I'm willing to do so it wouldn't be me! Maybe Bittty....

 

Last edited by Gidget (9 years ago)

---

Do not assume that you speak for all just because you are the loudest voice; there are many who disagree that simply have no desire to waste words on you.

#30 Report | Quote[en] 

Yegads! All true, Gidget. Thank goodness that there is no evidence that the devs used more than one RNG to generate the probabilities in xp for crafting. The number of samples that both Daomei and I did are consistent for a single RNG to determine success and a second one to determine degree of failure.

---


Remembering Tyneetryk
Phaedreas Tears - 15 years old and first(*) of true neutral guilds in Atys.
(*) This statement is contested, but we are certainly the longest lasting.
<clowns | me & you | jokers>
uiWebPrevious123uiWebNext
 
Last visit Sunday, 24 November 07:18:57 UTC
P_:G_:PLAYER

powered by ryzom-api